SM-3210J series membrane cleaning agents are liquid cleaning agents, which can effectively remove all kinds of inorganic and organic pollutants.
SM-3210J series membrane cleaning agent is a highly concentrated liquid, which is very convenient for users to use.
|
Cleaning agent name |
Cleaning object |
Membrane type |
Solution PH value |
|
SM-3210J01 |
Microorganisms; silt; organic matter; colloids; acid-insoluble substances |
CA |
Neutral |
|
SM-3210J02 |
CaCO3; Metal oxides; Inorganic salts; acid-soluble substances |
TFC |
Low |
|
SM-3210J03 |
Microorganisms; silt; organic matter; Colloids; acid-insoluble substances |
TFC |
High |
Cleaning procedures:
① Do a good job before cleaning preparation, according to 1 liter of cleaning agent to 40 liters of water ratio configuration of cleaning fluid, full of cleaning medicine box.
② Each cycle of the cleaning fluid in the system should be at least 1 hour, and soak for more than 2 hours at the same time.
③ Increasing the temperature of cleaning solution is helpful to improve the cleaning effect, it is necessary to pay attention to do not exceed 40ºC.
④ Pump pressure should be less than 4.2 kg/cm2 during cleaning.
Recommended
flow rate per pressure vessel:
4 inches 2.1m 3/h
8 inches 8.0 m3/h
⑤ Rinse with product water under low pressure for at least 30 minutes after cleaning.
⑥ After the system is put back into operation, the first 15 minutes of product water will be drained out.
